|
|
|
| 2015-08-19 16:40:05 released a total of15822people concerned about the information |
| R2600
-L is designed in accordance with customers’ requirements and characteristics
of businesses and industries. R2600-L is a 4G wireless router based on 4G
network for remote data transmission. It can fully meet the networking needs of
M2M. R2600-L is simple to install and use and easy to maintain. It can be
widely used in many industries including financial industry, insurance
industry, petrochemical industry, power industry, environmental protection,
transportation, and vehicle management etc. |
Product panels
Figure 1: rear panel
Figure 2: front panel
Specifications
type of network
|
Items
|
Contents
|
|
Network type
|
Support：LTE-TDD、LTE-FDD、TD-SCDAM、WCDMA、EVDO、
CDMA1x、EDGE/GPRS/GSM
|
Hardware
|
Items
|
Contents
|
|
CPU
|
Industrial-grade ARM9
embedded processor,，CPU frequency 400MHz
|
|
NAND FLASH
|
1GBit（128M byte）
|
|
SDRAM
|
2*64MBit（2*8M byte）
|
Interface type
|
Items
|
Contents
|
|
LAN Ports
|
1× 10/100m
Ethernet ports (RJ45 socket); adaptive MDI/MDIX; built-in 1.5KV
electromagnetic separate protection
|
|
RS232 port
|
v 1 × RS232 serial port, built-in 15KV
ESD protection
v Data bits: 5, 6, 7, 9 bits
v Stop bits: 1, 1.5, 2 bits
v Parity: none parity , even parity, odd
parity, SPACE and MARK parity
v Serial port rate：110~230400bits/s
v Default
parameters: 115200, N, 8, 1
|
|
Status indicators
|
2 × status indicator TS1, TS2; 1 × network
indicator LAN;1 × wireless internet indicator MOBILE
|
|
4G antenna interface
|
Standard SMA
female antenna interface; characteristic impedance 50 Ω
|
|
SIM/UIM interface
|
3.3V/5V
|
|
Power interface
|
Standard 3-core
locomotive power socket; built-in reverse power protection
|
Power
|
Items
|
Contents
|
|
Power output
|
DC9V----24V/2A
|
|
Maximum power
consumption
|
3.5W
|
Physical characteristics
|
Items
|
Contents
|
|
Case
|
Aluminum case
|
|
Dimensions
|
126MM * 83MM * 32MM
|
|
Net weight
|
0.26kg
|
|
Total weight (including
package)
|
0.86kg
|
Other parameters
|
Items
|
Contents
|
|
Operating temperature
|
-40℃～85℃
|
|
Operating humidity
|
≤85%
|
Functions
|
Basic functions
|
Routing management
|
Supports static routing; multiple
routing tables are available.
|
|
Parameter resetting
|
Gives a command to reset the
factory parameter settings.
|
|
PPP protocol
|
v Supports PAP/CHAP/MS-CHAP
authentication protocol
v Supports IP address
negotiation and fixed allocation from center
v Supports APN
configuration
v Supports MPPC/MPPE
|
|
Automatic dial
|
Supports automatic reconnecttion
|
|
Dial-On-Demand
|
Supports Dial-On-Demand
|
|
Supports DTU function
|
Serial to Ethernet protocol
|
|
Authentication
|
PAP/CHAP/MS-CHAP
|
|
Equipment maintenance
|
v Supports import and export
v Supports tftp upgrade
|
|
Network functions
|
Supports IP address and MAC binding
|
|
Supports DHCP service
|
|
Supports TELENT server and client
|
|
DNAT/SNAT/static NAT
|
|
Monitors Internet traffic
|
|
Supports Ethernet ports connection
and duplex mode
|
|
Supports TRACEROUTE
|
|
Supports Cisco compatible ACL
function
|
|
Supports DNS, DDNS client
configuration
|
|
Supports VRRP
|
|
Supports PPPOE protocol, PPTP
protocol, L2TP protocol
|
|
Supports GRE protocol
|
|
Supports Qos speed limit
|
|
Supports DMZ port mapping
|
|
Supports multiple IP setting
|
|
VPN Functions
|
IPSec
|
IPSec server
|
|
IPSec client
|
|
IKE automatic key management
|
|
Supports AH and ESP
|
|
Supports AES/128, AES/192, AES/256, DES, 3DES
encryption algorithm
|
|
Supports SHA, MD5 authentication algorithm
|
|
PFS Group 1,Group 2,Group 5
|
|
IPsec NAT Traversal
|
|
Supports DPD link-keep-alive
|
|
Supports main mode and aggressive
mode
|
|
|
|
|
|
|
|
